Hi-Techno pump IX
series
|
|
A wide turndown ratio
A control motor adjusts the discharge and suction speeds to meet a
wide turndown ratio of 750:1 from 200 mL/hr to 150 L/hr. (S6 type
150:1)
Energy savings and Eco-friendly
With the use of helical gears and spring assistance, power consumption
is reduced by 70% compared to the standard spring back design.
Precise chemical dosing operation
The valve design maintains precise dosing at any flow rate whilst
the motor regulates discharge and suction speeds to achieve high accuracy
(+/-1%) all with a cost effective design from a mechanically driven
diaphragm pump.
Efficient pump head design
is incorporated with high compression
Fast priming without air locks is achieved with a high compression
ratio due to a fixed (maximum) stroke length. |
|
Constant injection
with low impact
Flow control via discharge speed adjustment (with a fixed suction
speed) assures constant injection at any flow rate. This system also
reduces impact (inertia force) and load to the discharge line.
Compliant to world standards
One of the IX features is multi-voltage operation (100-240VAC) compatible
worldwide.
Compliant to UL, CE standards. Drive and control units are sealed
separately to an IP65 enclosure.
Safety
design
Standard to all models is a diaphragm rupture detector, protecting
users and the environment. Also, a detector for abnormal operation
protects the pipework in case of an accidental high discharge pressure
caused by clogging or improper operation. A Foolproof valve design
only allows assembly in the correct orientation and a drain hole also
ensures safe operation even when the diaphragm is damaged.
 |
Specifications (50/60Hz)
| Capacity |
0.2 - 150 L/hr |
| Max. discharge pressure |
0.4 MPa |
| Main materials |
PVDF (IX-C150TC/TE), SUS316 (IX-C150S6) |
| Connection |
Thread (R3/4 or 3/4NPT),
Flange (JIS10K 20A or DIN PN16 DN20) |
| Liquid temp. range |
TC/TE: 0 to 50 C deg.
S6: 0 to 80 C deg. |
| Maximum viscosity |
1000 mPa·s |
|
• New products
|
|
Catalog (PDF: 721KB