IWAKI PUMPS GLOBAL IWAKI PUMPS
With a rich assortment of products in stock. We can meet any specification you require.
Home | new products | products | contact us | exhibitions | company | Global sites | Site map Japanese page
New products

The optimum for gaseous liquid feeding

Contact us | PDF Catalog for Europe (PDF: 444KB)

Electromagnetic metering pumps with an automatic air vent  EWN-A series

The optimum for gaseous liquid feeding
This type equips automatic air vent mechanism. An air vent valve built-in pump chamber enables reliable air venting. Also equipped manual air vent valve enables easy pressure release in discharge piping. Gaseous liquid such as sodium hypochlorite or hydrogen peroxide can be injected without gas locking.

  • Entrained air is automatically expelled from the pump head. No special degassing is needed.

  • The pump immediately resumes operation without gas lock even after a long period of stoppage.

  • Use the air vent port manually for quick release of discharge line pressure.

  • Capable of pumping concentrated sodium hypochlorite


  Principle of operation
Principle of operation

Air which comes from suction port goes to the connection adapter through pump head. Because pump discharge side is pressurized, air goes to the automatic air vent valve which the pressure load is lower than pump discharge side, and goes out little by little together with liquid.

Once the pump gets out of locked air condition, it returns to normal operation to discharge the liquid. A ittle bit of liquid is discharged from automatic bleed valve, too.

Specifications
Max. discharge capacity 110 mL/min
Max. discharge pressure 1.0 MPa
Main materials PVC
Stroke rate 1 to 360 spm
Power voltage 100 - 240 VAC 50/60Hz
Liquid temp. range -10 to 40 C deg.
• New products

Page Top
THIS IS THE IWAKI OFFICIAL WEB SITE. ALL RIGHTS RESERVED BY IWAKI CO., LTD.