 | |
From fine slurry to highly viscous liquid
Not only the gear itself, but the bearing, shaft, and other sliding parts are also manufactured from ceramic. Therefore, the pumps in this series are free from trouble caused by galling or seizure, thus allowing the pump to be run safely even when operated at high speed. The pump can be used to transfer even highly viscous liquid or soft or hard slurry liquid consisting of fine sludge.
Free of galling and seizure
Not only the gear itself, but the bearing, shaft, and other rubbing parts are also manufactured from ceramic. Therefore, the pumps in this series are free from trouble caused by galling or seizure, thus allowing the pump to be run safely even when operated at high speed.
Superior corrosion resistance
The wetted parts or the parts in contact with liquid are constructed with corrosion-resistant components, making the pump ideal for use with various types of chemicals.
Pulsation-free and metering injection
The pump discharges liquid precisely at all times regardless of changes in liquid temperature. When combined with an Iwaki pump control system, the pump can be used to inject liquid precisely without pulsation.
Leakage-free, sealless structure
As is common with corrosion resistant pumps, this series uses the magnetic drive method, eliminating problems caused by liquid leakage.
|
Specifications (50/60Hz)
| Max. discharge capacity |
35.2/42.5 L/min |
| Max. discharge pressure |
0.7 MPa |
| Max. speed |
1410/1700 rpm |
| Main materials |
SUS316, SiC, PTFE |
| Required power range |
0.2 to 3.7 kW |
| Liquid temp. range |
0 to 80 C deg. |
| Viscous liquid |
0.5 to 100 mPa•s ＊ |
| Slurry liquid |
Can not be handled. |
| Sealing method |
Seal-less construction |
＊Ask us for 100mPa.s or more. |
• Magnetic drive pumps
• Metering pumps
 & dosing pumps
• Pneumatic drive pumps
• Air pumps
• Gear pumps
• Turbine pumps
• Screw pumps
• Water quality control |
|
Catalog (PDF: 751KB)