IWAKI PUMPS GLOBALIWAKI PUMPS
With a rich assortment of products in stock. We can meet any specification you require.
Home | products | contact us | exhibitions | company | global sites | site map | download Japanese page
Metering pumps & dosing pumps

A new generation of advanced metering pump technology!

Hi-Techno Pump IX series
Contact us | PDF catalog (PDF: 1.6MB)

A new generation of advanced metering pump technology!
A wide turn down ratio
A control motor adjusts the discharge and suction speeds to meet a wide turndown ratio of 750:1.

C150 Capacity
0.2 - 150L/h
  
C060 Capacity
0.08 - 60L/h
2種類のヘッドサイズ


Energy savings and Eco-friendly
With the use of helical gears and spring assistance, power consumption is reduced by 70% compared to the standard spring back design.

電力消費比較		 Precise chemical dosing operation
The valve design maintains precise dosing at any flow rate whilst the motor regulates discharge and suction speeds to achieve high accuracy (+/-1%) all with a cost effective design from a mechanically driven diaphragm pump.

Efficient pump head design is incorporated with high compression
Fast priming without air locks is achieved with a high compression ratio due to a fixed (maximum) stroke length.

Constant injection with low impact
Flow control via discharge speed adjustment (with a fixed suction speed) assures constant injection at any flow rate. This system also reduces impact (inertia force) and load to the discharge line.

Viscous liquid transfer
Standard IX series is capable of pumping liquid viscosities of up to 1000mP•a. Contact us for higher viscosity applications.

Compliant to world standards
One of the IX features is multi-voltage operation (100-240VAC) compatible worldwide. Compliant to UL, CE standards.

IP65
Drive and control units are sealed separately to an IP65 enclosure.

Safety design
Standard to all models is a diaphragm rupture detector, protecting users and the environment. Also, a detector for abnormal operation protects the pipework in case of an accidental high discharge pressure caused by clogging or improper operation. A drain hole also ensures safe operation even when the diaphragm is damaged.


Safety design


Specifications of pump (50/60Hz)
Capacity 0.08 - 150 L/hr
Max. discharge pressure 1.0 MPa
Main materials PVDF, SUS316
Liquid temp. range PVDF: 0 to 50 C deg.  SUS316: 0 to 80 C deg.
Maximum viscosity 1000 mPa·s

Specification of controller
Operation mode MAN (Manual) C060: 80 mL/h - 60 L/h, C150: 200 mL/h - 150 L/h
EXT Analogue control 4 - 20, 0 - 20, 20 - 4, 20 - 0 mA
Pulse control C060: 0.00625 mL/PLS - 120 mL/PLS, C150: 0.01560 mL/PLS - 300 mL/PLS
Batch control C060: 6.25 mL/PLS - 120 L/PLS, C150: 15.6 mL/PLS - 300 L/PLS
Interval batch control Time 0-9 day, 0-23 H, 1-59 min
Capacity C060: 6.25 mL - 120 L, C150: 15.6 mL - 300 L
Input STOP / Pre-STOP / AUX / Interlock No-voltage contact or open collector
Profibus Communication protocol: Profibus-DP
International standard: Compliant to EN50170 (IEC61158)
Analogue 0-20 mA DC (Internal resistance is 200 Ω .)
Pulse No-voltage contact or open collector (MAX pulse frequency is 100 Hz.)
Output Alarm 1 No-voltage contact (Mechanical relay) 250VAC 3A (Resistive load)
Selectable: STOP, Pre-stop, Interlock, Leak Detection and Motor Overload.
Alarm 2 No-voltage contact (PhotoMOS relay) AC250V 3A (Registive load)
Selectable: STOP, Pre-STOP, Interlock, Leak Detection and Motor Overload.
Power supply 12VDC 30mA or below
Power voltage 100-240VAC 50/60Hz
• Magnetic drive pumps
• Metering pumps
& dosing pumps • Pneumatic drive pumps
• Air pumps
• Gear pumps
• Turbine pumps
• Screw pumps
• Water quality control

Page Top
THIS IS THE IWAKI OFFICIAL WEB SITE. ALL RIGHTS RESERVED BY IWAKI CO., LTD.