Product information
- Catalogs and Download
- Product data, catalogs, and instruction manuals can be downloaded from the member site.
※ Membership registration is required.
Max. discharge capacity range :38 - 450 mL/min The latest electromagnetic metering pump equipped with digital controller & multi-voltage
※In order to download information materials and catalogues, you need to register a user
account (for free) with us. Membership Registration
Wide variety of standard pump head (VC/VH/PC/PH/PP/FC/SH), automatic air vent type (NAE) and high compression type (55 type).
• Refer to page 5 for details of NAE and 55.
Thanks to digitized controller, stroke speed can be adjusted by 1 spm step from 1 to 360 spm. Combined with stroke length adjustment, you can do the fine adjustment from very small flow to maximum flow rate.
Multi-voltage power source from 100 – 240VAC for all models. You are now free from worrying about power voltage.
Standard pump head models (VC/VH/PC/ PH/PP) equip ai r vent valve. Air in the pump chamber can be easily released by turning knob.
Each unit such as driving unit and control unit is sealed to make the pump IP66 equivalent water/dust-proof.
• Do not install pump outdoor.
The use of a new hose stopper eliminates a twist in tube connection.
• Except for the following
Wet-end material: FC type, SH type, Accessories: Check valve CS type, Controller: EHN-R/YN Flow Checker corresponding type, Backflow prevention valve, Back pressure valve, Flow checker, T-joint
Max. discharge capacity range | 38 – 450 mL/min |
---|---|
Max. discharge pressure | 0.2 – 1.0 MPa |
Main materials | PVC, GFRPP, PVDF, SUS316 |
Stroke rate | 1 – 360 spm |
Power supply | AC 100 – 240 V, single phase, 50/60 Hz |
Liquid temperature range | PVC type: 0 – 40˚C GFRPP type, PVDF type, SUS316 type: 0 – 60˚C |
Viscous liquid | Please contact us for details. |
Slurry liquid | Can not be handled. |
Operation mode | Manual, EXT (Pulse multiply or dividing) | |
---|---|---|
Control function | Setting |
|
STOP | The pump stops while receiving the stop signal (Make off/Make on can be selected by changing controller setting) | |
Input | Pulse | No voltage contact, Open collector |
Stop | No voltage contact, Open collector | |
Analogue | — | |
FCM | — | |
Alarm output | — | |
Sensor Power voltage | — | |
Power voltage | 100 – 240VAC 50/60Hz single phase |
Kindly use this inquiry form for placing an order or sending your inquiry
about our fluid control devices including chemical pumps.
HomeP