Features of LK-TC series
The pump liquid ends are made from high grade materials such as polyvinylidene fluoride (PVDF), carbon fiber reinforced polyvinylidene fluoride (CFRPVDF), ceramic, PTFE, and FKM. These chemical resistant components create pumps ideally suited for pumping strong acids and many aggressive chemicals.
A compact, yet robust, drive mechanism is utilized in the LK series. Oversized bearings a and highly reliable worm gear provide a resilient drive unit. A fully-sealed oil bath lubrication system makes the LK highly durable, even for long-term continuous operation and in outdoor installations.
9 special motor type (0.2kW) models and 4 general purpose motor type models provide a full line to handle a wide range of flow rate requirements.
Specifications (50/60Hz)
| Discharge capacity range*1 |
0.02 – 9 / 0.024 – 10.8 L/min |
| Max. discharge pressure range |
0.3 – 1.0 MPa |
| Main materials |
CFRPVDF, PVDF |
| Motor output range*2 |
0.2 – 0.75 kW |
| Liquid temperature range |
0 – 50°C |
| Viscous liquid |
Please contact us for details. |
| Slurry liquid |
Please contact us for details. |
*1 The capacity is the value when maximum discharge pressure is applied (with pure water at room temperature). The value may be lager than indicated in the table if the discharge pressure is lower. As for the liquid conditions pumped and performance. Please contact us for details.
*2 The LK type is equipped with Iwaki original flange motor. The standard is 200V 3-phase, totally enclosed fan-cooled outdoor type. Other motors for different voltages, explosion-proof motors, or single-phase motors are available. LK-F, LK-A and B are to be installed with general purpose flange motors.
