Features of FF / FF-H series

The FF series are specified for use with medium temperature liquids (The PVC cylinder type: 5 – 50˚C; Al cylinder type: 5 – 100˚C.) and the FF-H series are designed to handle a wide range of chemical liquids ranging from ordinary temperatures to high temperatures (20 – 180˚C).

The liquid end parts are made entirely from fluororesin and free from contamination as they are designed so as to use neither rubber nor metal. As the bellows are completely welded with the body of the FF-H series, there is no leakage due to heat cycles. The dead volume of air is minimized for saving the consumption of air.

The packing of the pump shaft can be replaced with a new one easily, without disassembling the pump.
The suction port and discharge port are of PFA tubular structure in the FF-H series. For the FF series, a tubular structure type and pump attached with special fitting are available.
When connected to a special controller, the discharge can be controlled and monitored easily.


Model FF FF-H
Max. discharge capacity range 10 – 22 L/min 20 – 40 L/min
Max. supplied air pressure 0.15 – 0.3 MPa  0.15 – 0.2 MPa
Max. air consumption 180 NL/min 200 NL/min
Max. stroke speed 120 spm
Main materials PTFE, PFA
Liquid temperature range B type: 5 – 100˚C
C TYPE: 5 – 50˚C Note
B type: 20 – 180˚C
C TYPE: 5 – 50˚C

Note: The cylinder of the “B” type is made of aluminum and tetrafluororesin and that of the “C” type is of PVC.
Max. discharge capacity shows when pumping clear water at  20˚C.

Product information

Catalogs and Download
Product data, catalogs, and instruction manuals can be downloaded from the member site.
※ Membership registration is required.

Contact Us

Kindly use this inquiry form for placing an order or sending your inquiry
about our fluid control devices including chemical pumps.